53 English
EXPOSURE CORRECTION
By assigning the exposure correction operation shortcut to the SET button
(page 123), you can make the image lighter or darker when capturing images.
1 Assign the operation
shortcut to the SET button
(page 123).
2 Toggle the SET button in the
direction for which the
operation shortcut was
assigned.
h The exposure correction bar
appears.
3 Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to
a value from –1.8EV to
+1.8EV.
h The exposure correction bar
is canceled when the MENU
button or the SET button is
pressed.
12
00:00:15
SET button
Exposure correction bar
Pointer
To Next Page
Loading...
