19 English
CHARGING THE BATTERY PACK
Before using the supplied battery pack in the camera, it must be fully charged.
1 Insert the battery pack in the
battery charger.
h Insert it in the direction
indicated by the [o] mark
on the battery pack.
2 Connect the supplied power
cord to the socket on the
battery pack charger.
h Insert the connector straight
and securely.
3 Plug the power plug into a
power outlet (AC 100 V to
240 V).
h Recharging begins.
h During recharge, the
CHARGE indicator is lit red.
4 When the CHARGE indicator
turns off, unplug the power
cord from the power outlet,
and remove the battery pack
from the charger.
HINT
i If the camera becomes wet, after wiping off the moisture with a dry cloth,
remove the battery pack and recharge it.
i The recharge time is approx. 90 minutes.
Battery pack
[o] mark
To power outlet
CHARGE indicator
Socket
Power cord
Red indicator light
To Next Page
Loading...
