Sanyo Xacti VPC-CA6 - Shoot a Still Image While Recording a Video Clip

47 English
SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP
You can capture a still image while recording a video clip.
1 Turn on the camera (page 24).
2 Press the video clip recording
button [ ].
3 When you see a scene you’d like
to capture as a still image, press
the still image shooting button
[].
4 End the recording.
h Press the video clip recording
button to stop recording.
HINT
i When shooting a still image while recording a video clip, the flash does not
operate.
i When shooting a still image while recording a video clip, the display briefly
pauses, and then returns to the video clip display after the still image is
captured.
i If the still image resolution is set to k or Q, it automatically changes to
x and the image is captured.
i It is not possible to shoot a still image while recording a video clip when the
remaining video clip recording time is 10 seconds or less.
00:00:09
00:00:09
00:00:09
Video clip recording
button [ ]
Still image shooting button
[]