Sanyo Xacti VPC-CA6 - Page 173

English 158
Shooting
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
52
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
76
When
recording a
video clip
under
fluorescent
lights, a
noticeable
flicker appears
in the image.
This occurs
when the
shutter speed
is too fast.
Set the ISO
sensitivity to
w or less.
76
Monitor
No playback
image
appears.
The camera is
not in the
playback
mode.
Press the REC/
PLAY button to
switch to the
playback
mode.
37, 42,
50
Problem Cause Action
Reference
page