Changing the brightness (exposure
correction)
When capturing images, you can make the image lighter or darker.
1
Exit the Shooting Setting Screen
(see page 44).
œ Press the MENU button to exit the
Shooting Setting Screen.
2
Press the [d] or [c] arrow button.
œ The exposure correction bar appears.
œ At this point, you can press the [d] or
[c] arrow button to adjust the
exposure.
3
Capture the image.
HINT
œ Exposure correction setting is canceled in the following cases:
œ
When the pointer is set to the center position.
œ
After the shooting mode is changed.
œ When the main switch is set to [Ô].
œ
When the camera is set to the playback mode or the PC connection
mode.
œ
After the power is turned off.
œ The exposure setting numerical value is shown at the left end of the
exposure bar. The exposure can be set to a value from –1.8EV to +1.8EV.
œ While exposure correction is active, the accessing indicator in flashes
green.
œ You can also correct the exposure by selecting the exposure correction
icon Ê on the Shooting Setting Screen.
6
Darker [d] Lighter [c]
Pointer
Exposure
correction
setting
Exposure
correction
bar
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
66
To Next Page
Loading...
