Sanyo XM150 - Page 24

-24-
Mechanical Disassembly
8-1. Power Box disassembly and Fan (FN901) removal
1. Remove 1 screw-A (M4x8) and 3 screws-B(M3x8) and remove the Ballast
shield top.
2. Remove 2 screws-C (M3x8) to take the Holder. Unhook the 4 hooks-D and
take the Ballast board off.
3. Remove 3 screws-E (T3x28) to take the Fan (FN901) off.
C
Ballast shield top
C
A
B
B
B
E
E
E
Ballast Board
Spacer
D
D
D
D
Holder
M3x8
M4x8
M3x8
M3x8
Power board
Power holder
9. Control board and Fans (FN902,FN903,FN904) removal
1. Remove 3 screws-A (T3x8) to take the Lamp fan assy off.
2. Pull the holder on the Control board up to release the hook and remove the
Control board assy upward off.
A
A
A
Lamp fan assy
Control board assy
M3x8
M3x8
T3x10
T3x10
T3x10
T3x10
T3x10
T3x22
FN902
FN904
FN903
Spacer
Holder
Spacer
FN901
Spacer