Operating Instructions Combics Indicators 135
Menu Structure
Menu Structure
Overview of the complete menu structure; the individual setting parameters are listed on the following pages.
The indicator only displays the menus that correspond to the available hardware.
Applic. Setting and selection applications (see page 136)
- Applic.1 Basic weighing function, Counting z , Neutral measurement znM, Animal weighing j, Weighing in
percent % applications
- Applic.2 Checkweighing
+
/
–
, Classification
W applications
- Applic.3 Net-total formulation R , Totalizing s applications
- aut.tare Automatic taring: first weight tared
- min.tare Minimum load for automatic tare and printout
- aut.strt Automatic start of application
- CLER.CF Selective deleting with the C key
- TARE.FNC Tare function
- Reset Factory settings for all applications
fn-key Defines functions of the k key (see page 140)
- off
- 2ND.UNIT
setup Adjusts device settings to user requirements (see page 140)
- wp1 Settings for weighing platform 1
- com1 Settings for the RS-232 interface
- unicom Settings for the 2nd optional interface
- com-wp 10,000e ADC setting
- CTRL IO Universal input and digital IOs setting (optional)
- Barcode Settings for barcode function
- print Printout settings
- UTILIT. Settings for additional functions
- Time Time setting
- Date Date setting
- U-CODE User password entry for locking the Setup menu
- s-date Only visible in Service mode; applications
- ser.no Only visible in Service mode; serial number
- model Only visible in Service mode; serial number
- s-sqmin Only visible in Service mode;
- sqmin Activates display or GMP-compliant printout
- ALIB.MEM
info Displays device-specific information (see page 150)
- service Service date
- term Indicator serial number
- wp-1 Weighing platform 1 device data
- wp-2 Weighing platform 2 device data
- flexinf FlexPrint settings
- alib.mem Alibi memory settings (optional)
LANGUAG. Language setting for display and printout (see page 150)
- deutsch
- english
- u.s.mode
- franc.
- ital.
- espanol
- codes
ADC.CON ADC configuration settings (see page 151)
- VERIF.
- standrd
To Next Page
Loading...
