8 |
Auxiliary Service Tools, Equipment and Weights
Caution: After removing the seal (warranty label) and fi nishing service work, reaffi x your
control seal with the Sartorius logo!
Please make sure that you use the proper tools and equipment and that the
balance/scale is set up on a solid, level surface and in a clean work area that is free
of vibrations and drafts.
PSION CAS Version 4.9 and later
Service software CAS for PC Version 1.44 or later 6740-33
and
RS232 connecting cable (25-Pin) 7357312
or
RS232 connecting cable (9-Pin) 7357314
Tool Kit Angled fi le 6740-80
In addition to your standard tools and equipment, you will need the following sets of
weights when working on Sartorius Competence balances/scales:
For Model Accuracy Weight Catalog No.:
CPxxxx-CPAxxxx class (OIML) in grams
CP64 E2 1x50 YCW4528
CP124S, GC803 S/P E2 1x100 YCW5128
CP323P, CP153 F1 1x100 YCW5138
CP225D, CP224S E2 1x200 YCW5228
CP324S, GC1603P E2 1x200+ YCW5228 +
1x100 YCW5128
CP423S, CP323S,
GC 2502 F1 1x200 YCW5238
CP622 F2 1x500 YCW5548
CP3202P, CP2202S F1 1x1000 YCW6138
CP4202S, CP3202S,
CP4201, CP2201,
GP3202 F1 1x2000 YCW6238
CP8201, GP8201,
CP6201 F1 1x5000 YCW6538
CP34001S, CP34001P,
CP16001S, CP12001S,
CP34000 F1 1x10000 YCW7138
Accompanying Literature
Operating Instructions Sartorius Competence/CP/CPA Series/Sartorius Gemplus Publica-
tion No: WCP6006-e05073
Auxiliary Service Tools, Equipment and Weights
To Next Page
Loading...
Need help?
General
