EasyManua.ls Logo

Sartorius EVO1S1 - 4.3 Installing the Scale; 4.4 Supply Voltage

Sartorius EVO1S1
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 EVO1S1 | SPO1S1 Operating Instructions
Installation
4.3 Installing the Scale
Inserting the Weighing Pan
t Place the weighing pan onto the scale from above.
4.4 Supply Voltage
The scale is normally powered via the USB connection of your PC, which also supplies
data for the scale. If this USB connection is not available, you can use AC adapter
YEPS01-USB (see Chapter “12 Accessories,” page 36) for the power supply, which
comes with different,
country-specific mains adapters. The assembly is described in
the following.
4.4.1 Power Supply Assembly
If using a power supply, it will need to be assembled.
Using the wrong mains adapter may cause a fatal electric shock and damage
the equipment.
Never plug the mains adapter into the socket when it is disconnected from the AC
adapter (danger of electrical shock).
t Select the correct mains adapter for your mains power supply. The mains adapter
must be suitable for use with the wall outlet at the installation site.
Mains adapter sets
Bag Region/country
YEPS01-PS1 USA and Japan (US+JP)
Europe (EU)
United Kingdom (GB)
YEPS01-PS6 Argentina (AR)
Brazil (BR)
Australia (AU)
South Africa (ZA)
YEPS01-PS7 China (CN)
India (IN)
Korea (KR)

Table of Contents

Other manuals for Sartorius EVO1S1

Related product manuals