EasyManuals Logo

Sartorius EVO1S1 User Manual

Sartorius EVO1S1
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28 EVO1S1 | SPO1S1 Operating Instructions
Operation
Changing the Password
The password is numeric and can have up to six digits. Entering six spaces deletes the password, which deactivates the password
function. This restores the device to its original setting (scale is not password-protected).
t Access the Setup menu (see Chapter 6.7.2.1, page 25).
Level 1 Level 2 Level 3
INPUT
t Press O / P, select INPUT, press !
| - - -
PASSWD.
t Press O / P, select PASSWD., press !
| - - -
OLD PW
| - - -
| - - -
| - - -
| - - -
| - - -
| - - -
| - - -
y When an old password is active, OLD PW appears briefly so that you can enter the old password.
y This appears “_ _ _ _ _ _ .”
y The first line flashes.
t Make the following inputs:
O / P keys: Selects numbers 0 to 9.
§: Go back to the previous number.
!: Confirm entry or go to the next number.
t Repeat to enter the remaining numbers.
y If you make an incorrect entry, NOT OK appears. Press ! and reenter the old password.
NEW PW y When you make a correct entry, NEW PW appears briefly so that you can enter the new
password.
y This appears “_ _ _ _ _ _ .”
y The first line flashes.
t Make the following inputs:
O / P keys: Selects numbers 0 to 9.
§: Go back to the previous number.
You can enter spaces to delete the number/password.
!: Confirm entry or go to the next number.
t Repeat to enter the remaining numbers.
y The password has been changed.
t Press § several times to exit the menu.
6.7.2.7 Resetting the Scale: “RESET”
If required, you can restore the scale to its factory settings.
Note:
If you have activated the password function, this feature is password-protected.
t Access the Setup menu (see Chapter 6.7.2.1, page 25).
Level 1 Level 2 Level 3 Level 4
SETUP
t Press O / P, select SETUP, press !
| - - -
GEN.SRV.
t Press O / P, select GEN.SRV., press !
| - - -
MEN.RES.
t Press O / P, select MEN.RES., press !
|- - -
DEFAUL.
t Press O / P, select DEFAUL.
|- - - o
NO
t Press !, “o” appears
y The factory settings are loaded
t Press § several times to exit the menu

Table of Contents

Other manuals for Sartorius EVO1S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sartorius EVO1S1 and is the answer not in the manual?

Sartorius EVO1S1 Specifications

General IconGeneral
BrandSartorius
ModelEVO1S1
CategoryScales
LanguageEnglish

Related product manuals