18 EVO1S1 | SPO1S1 Operating Instructions
Installation
4.4.2 Connecting the Scale
Connecting the Scale
t Insert the USB cable into the USB socket on the back of the display.
Laying the USB Cable
t Lay the USB cable through the cable holders on the back of the scale.
Connection to the Power Supply
t Insert the USB cable into a USB socket of a PC or laptop.
Connecting an AC Adapter (Option)
t Insert the USB cable into the YEPS01-USB AC adapter.
t Plug the AC adapter into the wall outlet (supply voltage).
4.5 Anti-theft Locking Device
t If required, secure the scale at the back.
To Next Page
Loading...
