19
Self-Test
After the scale is turned on, an automatic self-test of the scale's elec-
tronic circuitry is performed.
This self-test ends with the readout 0.0 g/0.000 kg (if the factory code
setting 5 1 1/ 5 1 2 is used).
Weighing
Now place your sample or object on the platform
(1)
to determine the
weight. Read off the weight indicated in the display
(9)
as soon as the
weight unit (in this case "g") appears as the stability symbol.
In addition to grams/kilograms, this scale gives you a variety of
other menu-definable international weight unit options.
Select the weight unit you need from the table of the menu options for
the scale operating program. Set the appropriate code as described in
the section "Scale Operating Program."
Taring
lf you wish to weigh into a Container or if the weight display does not
indicate 0.0 g/0.000 kg (or the equivalent with the weight unit of your
choice), press the tare control to zero the display.
Auto Zero
This scale has an automatic zero tracking function, known as "Auto
Zero" (can be turned off by menu code - see "Scale Operating Pro-
gram").
Changes off zero ≤ 0.5 of a digit per second are set to zero automati-
cally.
To Next Page
Loading...
Need help?
General