16
Startup
Connecting the Scale to Line Power
The scale is powered by an AC adapter. Make sure that voltage rating
printed on this unit is identical to your local line voltage rating.
lf the line voltage indicated or the plug design of the AC adapter does
not match the rating or Standard you use, please contact your Sarto-
rius dealer.
Important Note
Only use original Sartorius AC adapters identified by the Sartorius la-
bel. Use of AC adapters supplied by other manufacturers, even if
these adapters have a registered approval rating from a national test-
ing laboratory, requires the consent of a certified Sartorius technician.
Plug the cord of the AC adapter into the power
receptacle of the scale. Now plug the AC adapter
into a wall outlet.
Voltage Selection
You can select the voltage only if you use our portable power supply
(69 71172) that has a European-type plug (rounded prongs).
To Next Page
Loading...
Need help?
General