Error Codes
If you press a key that has no function,
or which is blocked at a certain point
in an application program, the error is
indicated as follows:
– a double-beep is sounded as an acoustic
signal if the key has no function
– an error message indicates invalid input
– an error code or error message indicates
incorrect operation
The response to operator errors is
identical for all operating modes. See
the chapter entitled “Error Codes”
for detailed explanations of the error
codes and messages.
Saving Data
Storing Parameter Settings
The most recent configurations of
Setup menu parameters and drying
programs are active when you switch on
the moisture analyzer. You also have
the option of restoring the factory
settings at any time (see below).
Protecting Parameter Settings
You can assign passwords to block
access to:
– user-defined drying programs
– the device parameter menu
– isoTEST functions
If no password has been assigned,
anyone can access and change the
Setup > Device menu and the user-
defined drying programs without
entering a password.
If you assign a password and then
forget what the word is, you can use
the General Password (see Appendix)
to access these menus.
12
To Next Page
Loading...
Need help?
General
