The moisture analyzer complies with the
following EC Directives and European
Standards:
Council Directive 89/336/EEC
“Electromagnetic Compatibility
(EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product standard
EN 61326-1 Kl.B (residential area)
Defined immunity to interference:
In accordance with product standard
EN 61326-1 (industrial area)
Important Note:
The operator shall be responsible for
any modifications to Sartorius equip-
ment and must check and, if necessary,
correct these modifications. On request,
Sartorius will provide information on
the minimum operating specifications
(in accordance with the Standards listed
above for defined immunity to interfer-
ence).
73/23/EEC “Electrical equipment
designed for use within certain
voltage limits”
Applicable European Standards:
EN 563
Safety of machinery – temperatures
of touchable surfaces
EN 60950
Safety of information technology
equipment including electrical business
equipment
EN 61010
Safety requirements for electrical
equipment for measurement, control
and laboratory use
Part 1:
General requirements
Part 2-010:
Particular requirements for laboratory
equipment for the heating of materials
If you use electrical equipment in
installations and under ambient condi-
tions requiring higher safety standards,
you must comply with the provisions
as specified in the applicable regulations
for installation in your country.
50
C Marking
To Next Page
Loading...
Need help?
General
