113
Example
Quick determination of the weights of a few consecutive samples with reduced resolution.
Presettings (different from the factory settings):
Setup: Application parameters: Additional function (F5): Change resolution
Step Press key(s) (or follow instructions) Display/Output
1. Switch on the balance if necessary and e
enter the presettings as shown above
2. Unload and tare the balance t
3. Reduce the resolution (here: 0.1 mg)
d*10 soft key
Readout while resolution is being changed:
Afterwards, the reduced resolution
is displayed
3. Reduce the resolution (here: 0.1 mg)
d*10 soft key
4. Weigh the example Place the sample on the weighing pan
(Example)
and weigh other samples as necessary
5. Change the resolution back
to normal:
Unload the balance if necessary and tare t
6. Change the resolution (here: 0.01 mg)
d/10 soft key
To Next Page
Loading...
