Sartorius ME5-F User Manual

Differential Weighing: Defining the
Weighing Sequence
You can choose from among four
sequences for measuring tare
weights, initial sample weights and
backweighed residue (“backweight”)
during differential weighing:
1. Individual Weighing
Tare weight, initial weight and back-
weight are measured in that order.
2. Consecutive Individual Weighing
Several individual weighing routines
(see above) are performed in series.
Tare
1
Init.wt.
1
Backwt.
1
Measured weights/values
Samples
Tare
2
Init.wt.
2
Backwt.
2
Tare
3
Init.wt.
3
Backwt.
3
Tare
1
Init.wt.
1
Backwt.
1
Measured weights/values
Sample
3. Combined Weighing
The tare and initial weight, in that
order, of each sample is measured first,
then the backweight of each sample is
measured.
4. Serial Weighing
First the tare weight for each sample is
measured, then the initial weight of
each sample is measured in the same
order that their tare weights were
measured, and then all backweights
are measured.
You can define the weighing sequence
in the Setup menu or by pressing the
Wg.seq (if the “Weighing sequence
key” option is activated).
Measured weights/values
Samples
Tare
1
Init.wt.
1
Backwt.
1
Tare
2
Init.wt.
2
Backwt.
2
Tare
3
Init.wt.
3
Backwt.
3
Measured weights/values
Samples
Tare
1
Init.wt.
1
Backwt.
1
Tare
2
Init.wt.
2
Backwt.
2
Tare
3
Init.wt.
3
Backwt.
3
Factory Settings of the Parameters
Weighing sequence:
Group weighing
Tare weighing: Yes
Result with decimal point:
2 decimal places
Autosave values: No
Minimum load for autosave:
10 digits
Save statistics: No
Generate printout:
Automatic after
backweighing
Include sample ID in the text line: No
Wg. seq. key: Yes
Clear sample after individual weight,
result + unload:
No
Last residual weight saved as the initial
weight:
No
76

Sartorius ME5-F Specifications

General

Brand	Sartorius
Model	ME5-F
Category	Scales
Language	English