Sartorius Microsart Series - Action in the Event of an Emergency; Proper Working Order of the Product; Significance of These Instructions

10 Operating Instructions Microsart
®
Manifold
Safety Precautions
t If a particular qualification is required for the tasks described, these tasks must be
performed by the required target group.
t If no qualification is required for the tasks described, the tasks can be performed
by the target group “User”.
2.3 Significance of these Instructions
Failure to follow the instructions in this manual can have serious consequences,
e.g. exposure of individuals to electrical, mechanical, or chemical hazards.
t Read the instructions carefully and in full.
t Ensure that the information contained in these instructions is available to all
individuals working with the product.
t Keep the instructions safe.
t If these instructions are lost: Request a replacement or download the latest version
from the Sartorius website (www.sartorius.com).
2.4 Proper Working Order of the Product
A damaged product or worn parts may lead to malfunctions or cause hazards which
are difficult to recognize.
t Only operate the product when it is safe and in perfect working order.
t Observe the maintenance and cleaning intervals (for intervals and maintenance
tasks, see Chapter “7 Cleaning and Maintenance”, page 28).
t Have any malfunctions or damage repaired immediately by Sartorius Service.
2.5 Action in the Event of an Emergency
If there is immediate danger of personal injury or equipment damage, e.g., due to
malfunctions or dangerous situations, the product must be immediately taken out of
operation.
t Shut down the vacuum pump.
t Set the valve stopcock to “Stop”.
t In the event of a malfunction, proceed as per the malfunction table (see Chapter
“8 Malfunctions”, page 33).
Manual_Microsart_Manifold_W166001-e.indb 10 28.02.19 10:03