Operating Instructions Microsart
®
Manifold 7
About these Instructions
1.2 Accompanying Documents
t In addition to these instructions, observe the following documentation:
− Operating instructions
Microsart
®
e.jet Transfer Pump
1.3 Target Groups
These instructions are addressed to the following target groups. The target groups
must possess the specified knowledge.
Target group Knowledge and responsibilities
User The user is familiar with the operation of the product
and the associated work processes. They understand the
hazards which may arise when working with the product
and know how to prevent them.
The user has been trained in the operation of the product.
Laboratory manager The laboratory manager makes decisions about the use and
configuration of the product.
Operator The product operator is responsible for compliance with
safety requirements and workplace safety regulations.
The operator must ensure that anyone working with the
product has access to the relevant information and is
trained to work with the product.
Manual_Microsart_Manifold_W166001-e.indb 7 28.02.19 10:03
To Next Page
Loading...