Operating Instructions Microsart
®
Manifold 19
Installation
4.2 Selecting an Installation Site
t Make sure that the following conditions are met at the installation site:
Condition Features
Ambient conditions − Suitability tested (see Chapter “13.5 Ambient
Conditions at the Installation Site”, page 40 for
ambient conditions)
Setup surface − Stable and even surface, as well as sufficient
operating height
− Sufficient surface area for the product and the
peripheral devices (for the product space
requirements, see Chapter “13.1 Dimensions and
Weights”, page 38; for peripheral device space
requirements, see instructions for the peripheral
devices, see Chapter “1.2 Accompanying
Documents”, page 7)
− Access to a vacuum source and a drain is provided
Access to parts relevant to
operation
Convenient and safe
Manual_Microsart_Manifold_W166001-e.indb 19 28.02.19 10:03
To Next Page
Loading...