Sartorius Microsart Series - Hose Coupling; Removing the Cover Cap; Removing the Hose

Operating Instructions Microsart
®
Manifold 25
Operation
6.4.2 Removing the Cover Cap
Procedure
t With your thumb on the front face, push the cover
cap towards the connector (1) and pull back the
outer sleeve of the connector with your index and
middle fingers.
t Then release your thumb and remove the cap from
the connector.
6.4.3 Attaching the Hose and Hose Coupling
Procedure
t Fix the manifold (1) with one hand and use the
other hand to connect the quick coupling (2) with
the hose to the manifold plug-in nipple.
6.4.4 Removing the Hose
Procedure
t Hold the manifold (1) with one hand and use the
other hand to pull the hose with the quick coupling
(2) from the manifold connector.
1
1
2
1
2
Manual_Microsart_Manifold_W166001-e.indb 25 28.02.19 10:03