Sartorius Microsart Series - Filters); Operation; Preparing the Process

22 Operating Instructions Microsart
®
Manifold
Operation
6 Operation
6.1 Preparing the Process
Procedure
t Ensure that the base support is decontaminated
before the process begins (see Chapter “7.6
Autoclaving Microsart
®
Manifold (Body) and Base
Support”, page 32).
6.1.1 Preparing the Base Support (When Using
Microsart
®
@filters)
Procedure
t Removing the sintered frit.
t Adapt the filtration unit on the base support.
6.1.2 Preparing the Base Support (When Using
Biosart
®
100)
Procedure
t Mount the filtration unit Biosart
®
100 to the base
support with an adapter.
Manual_Microsart_Manifold_W166001-e.indb 22 28.02.19 10:03