Sartorius SIWADCP - Weighing With Variable Tare Values

Signum 1-2-3
Operation
Operation
42
e
1.) Switch on the scale.
The automatic self-test runs.
When the weight readout is
shown, the scale is ready to
operate and automatically set
to zero. With no load on the
platform, you can zero the
weighing platform at any time
by pressing (.
2.)
Place empty container on the
platform.
)
3.) Tare the scale
Note: If the automatic tare
function is enabled, you do
not need to press the ) key.
The tare weight is saved
automatically when you place
the container on the platform.
Wait until a zero value is
displayed together with the
NET symbol (net weight).
4.) Place packaged sample in the
container (2nd tare value).
250
5.) Enter the tare weight of the
packaging in the current
weight unit using the keypad
(in this example, 250 g).
)
6.) Save the package weight.
The package tare is added to
the container tare.
Read the net weight.
p
7.) Print the results.
G# + 6.433 kg
T + 4.183 kg
PT2 + 0.250 kg
N + 2.000 kg
--------------------
0
8.) Clear the tare memory:
Enter a zero (“0" ) using the
keypad.
)
9.) Save the value (0) entered
(tare values are cleared;
the display shows the gross
value).
p
10.) Print the results.
G# + 6.433 kg
T + 0.000 kg
N + 6.433 kg
--------------------
Example with Signum
®
3:
Weighing with variable tare values, printing results, deleting tare values