Data Interface
84
Data Interface
For COM1 (25-pin D-Sub female connector), for model SIWSDCS/SIWSBBS with round socket*
COM1 All Signum
®
models Signum
®
2 and 3 only
Standard: RS-232 PC with serial RS-232 input port Red-green-red display
SBI | XBPI protocol YRD14Z (uses digital control lines)
Printer: Digital control lines
YDP04IS (TTL/ 5V)
YDP02IS <;=;set;>
YDP12IS to relay box YSB01
YDP20-0CE
External Alibi memory: YAM01IS Additional platform with
RS-232 interface
External Bluetooth adapter: YBT01 SMA | XBPI protocol
Second display: YRD02Z
USB adapter cable for connecting a PC via USB: YCC01IS
Digital in (TTL/ 5V)
Option: RS-232 As with standard RS-232 interface, but includes date/time
Option A31: “Clock”
Option: RS-232 As with RS-232 “Clock,” additional connection for barcode scanner (YBR02PS) or standard
Option A32: “connectivity” PC keyboard with PS/2 plug
Universal in: print/ tare Print/Tare key function
For UNICOM
Connector:
for RS-232/ RS-422/ RS-485 analog output/ digital I/O: 25-pin D-Sub female connector, for model SIWSDCS/SIWSBBS with round socket*
Ethernet: RJ-45 socket
Profibus: D-Sub 9 connector
UNICOM (optional)
RS-232 Option A1, YDO01SW-232 PC with serial RS-232 input port, SBI/XBPI protocol
External Alibi memory: YAM01IS
External Bluetooth adapter: YBT01
Second display: YRD02Z
USB adapter cable for connecting a PC via USB: YCC01-USBM2
Second weighing point: scale with RS-232 data output
Second weighing point: IS platform with optional RS-232 data output
Second weighing point for analog platform (e.g. Combics platform CAP*)
via YCO02IS-0CE transmitter
RS-422 Option A2, YDO01SW-485/422 Point-to-point connection with SBI/XBPI or SMA protocol
RS-485 Option A3, YDO01SW-485/422 Network up to 32 weighing instruments over XBPI bus
Additional IS platform with standard RS-485 data output
Analog output Option A9, YDO01SW-A0 Controllers with analog input
Dig. 5 In/5 OUT Option A5, YDO01SW-DIO For connecting the Signum scale to controllers
Digital IN: Voltage: 0-30 V DC Current: 1–2 mA
Digital OUT: Voltage: >30 V DC Current: 100 mA
For specific signals, please refer to the detailed descriptions of the options
Ethernet Option B9, YDO01SW-ETH Office or production area network
Profibus Option B1, YDO01SW-DP Devices with a Profibus DP field bus
* For model SIWSDCS/SIWSBBS with a round connector, you will need a corresponding adapter cable.
Contact your Sartorius dealer for more information.
To Next Page
Loading...
