Sartorius SIWRDCP - Barcode and Printout Configuration; Barcode Input and ID Code Settings; Printout Configuration and List Management

35
Setup
prtprot
6
7.10. Configuration list, individual, interface 2
blank
-------
form-fe
dat/tim
time
glphead
glpfoot
trans.no
id1
id2
id3
id4
net
gross
Tare
tare2
headr. 1
headr. 2
sn scal
7.11. Config. list, component, interface 2
blank
...
sn scal
7.12. Configuration list, total, interface 2
blank
-------
form-fe
dat/tim
time
glphead
glpfoot
trans.no
id1
id2
id3
id4
headr. 1
headr. 2
sn scal
7.13. GMP record (optional on Signum 1)
7.13.1* GMP off
7.13.3 GMP on for multiple results
7.14. Date with/without time
7.14.1* Date block includes time on printout
7.14.2 Time not printed
7.15. Automatic print after stability
7.15.1* Auto print at stability: off
7.15.2 Auto print at stability: on
7.16. Flex Print
7.16.1* Flex Print: no
7.16.2 Flex Print: yes
7.17. Decimal separator
7.17.1* Period (decimal point)
7.17.2 Comma
9.1. Restore factory settings in numeric menu for printout data protocol
9.1.1 Yes
9.1.2* No
* Factory setting