Cleaning the Data Printer
!When cleaning the data printer, make sure that no
liquid enters the housing
!Do not use aggressive cleaning agents (solvents or
similar agents)
§ Disconnect the power supply by
– Disconnect the power supply by unplugging the
interface cable (connecting the weighing instrument)
from the rear panel of the printer
or
– If the printer has an external power supply, disconnect
the power supply from the wall outlet (mains)
§ Use only a cloth moistened with a mild detergent
(soap) to wipe down the printer housing
§ After cleaning, wipe down the printer with a soft,
dry cloth
36
To Next Page
Loading...
Need help?
General
