35
Charging the Batteries
If the symbol shown on the left lights up:
$ Leave the weighing instrument on
> The batteries are charged while the weighing instru-
ment is in standby mode
> Allow 28 hours to fully charge the batteries in the
printer
$ If the symbol does not go out within 3 hours at the
latest, change the batteries
Replacing the Batteries
!Avoid draining the batteries excessively, as this will
reduce their recharging capacity.
!Use only size AA rechargeable nickel-metal hydride
batteries (see “Accessories”; order number 69Y03136)
§ Lift the cover of the paper roll compartment
§ Tilt back the cover of the battery compartment
!Remove the 4 batteries
Do not throw away used batteries with normal
household waste. Batteries contain toxic materials
and must be disposed of in accordance with local
waste disposal regulations.
$ If you have any questions, please contact your local
Sartorius Service Center
§ Install the 4 rechargeable batteries in the battery
compartment. Make sure that the poles match the +
and – signs.
§ Close the battery compartment
§ Close the paper roll compartment
To Next Page
Loading...
