42
(Shown
below, near
on
display
(in brackets is the factory
default value)
Minimum option of setting the heating temperature in
degrees °C. With this option, you can limit the heating
temperature that can be set using the thermostat.
Maximum set temperature of floor heating in °C. You can
limit the maximum set floor heating temperature.
Lowest set temperature of floor heating in °C. You can
limit the minimum set floor heating temperature.
Thermostat mode – Use of internal or external sensors.
AL – The thermostat uses both sensors for temperature
read – internal and external underfloor.
In – Thermostat uses internal temperature sensor only.
OU – Thermostat uses external underfloor temperature
Use this option to change the screen brightness.
2 – Screen backlight lasts 30 seconds;
3 – Screen backlight is always turned on
Heating Schedule programs.
Here you can turn on/off and set on how the heating
program schedule will work.
0 – The heating program schedule is turned off;
7 – 7 days (each day separately; table 1)
To Next Page
Loading...
Need help?
General
