Satel TD-1 - Description of Selected Functions

6 TD-1 SATEL
F13 - relay output 1 type.
F14 - relay output 2 type.
6.3 Description of selected functions
F9 – S1-S3 input function
on ıı - support for external probe.
InCo - support for bistable switch. Temperature measurement will only be effected by the
internal sensor. It will be possible to turn on the first or the second set of critical
parameters (high and low temperature threshold, permissible rate of temperature
change), as may be required.
oFFıı - input unused.
F10 – relay output 1 function
1 Lı - active after crossing the low temperature threshold of the internal sensor.
1 Hı - active after crossing the high temperature threshold of the internal sensor.
1 Lıı - active after crossing the low temperature threshold of the external sensor.
1 Hıı - active after crossing the high temperature threshold of the external sensor.
1LHı - active after crossing the low or high temperature threshold of the internal sensor.
1LHıı - active after crossing the low or high temperature threshold of the external sensor.
1 Gı - active when the temperature change was faster than that allowed for the internal
sensor.
1 Gıı - active when the temperature change was faster than that allowed for the external
sensor.
1oFF - disabled.
F11 – relay output 2 function
2 Lı - active after crossing the low temperature threshold of the internal sensor.
2 Hı - active after crossing the high temperature threshold of the internal sensor.
2 Lıı - active after crossing the low temperature threshold of the external sensor.
2 Hıı - active after crossing the high temperature threshold of the external sensor.
2LHı - active after crossing the low or high temperature threshold of the internal sensor.
2LHıı - active after crossing the low or high temperature threshold of the external sensor.
2 Gı - active when the temperature change was faster than that allowed for the internal
sensor.
2 Gıı - active when the temperature change was faster than that allowed for the external
sensor.
2oFF - disabled.
F12 – alarm
S Lı - on crossing the low temperature threshold of the internal sensor.
S Hı - on crossing the high temperature threshold of the internal sensor.
S Lıı - on crossing the low temperature threshold of the external sensor.
S Hıı - on crossing the high temperature threshold of the external sensor.
SLHı - on crossing the low or high temperature threshold of the internal sensor.
SLHıı - on crossing the low or high temperature threshold of the external sensor.
S Gı - when the temperature change was faster than that allowed for the internal sensor.