10 / 20
In the satellite search interface, pressing OK key will into the quick search.
If you set the My Longitude and My Latitude Under the “3.6 system setting”, the angle of LNB, the orientation
and elevation of antenna, all will be display on the screen.
Press ▲▼ key to select the TP frequency.
Press ◄► key to select S/Q, Monitor, Scan, Auto, Blind, then press OK key into function.
￭ S/Q: Enlarge showing the strength and quality ￭ Monitor: Level Showing the strength and quality
￭ Scan : According to the current TP, search channel,
￭ Auto : According to the user db of satellite, search
channel.
3.2TP Manager
Press ◄► key to change satellite .Pressing OK/▲▼ key,
switch to TP select
Press ◄► key to change satellite .Pressing▲▼ key to
select tp.
To Next Page
Loading...
