Satlink WS6922 User Manual

9 / 20
￭ Satellite Pos: Position of satellite, Input the value by using the numeric keys.
￭ My Longitude & My Latitude : Position of local, Input the value by using the numeric keys.
￭ Pos Command: Check the signal locked, the motor moves correct position, press OK key to store the present
position.
DiSEqC1.2 SET
￭ Satellite: Press ◄► key to select the desired
satellite.
￭ Frequency: Press ◄► key to select the TP.
￭ Move Step: The satellite can now be turned into the
desired direction using the arrow buttons
￭ Continuous Move: The satellite can be continuous
moved to the desired direction.
￭ Limit Setup: Set limits for the antenna.
￭ Go to Reference: A starting point for the satellite search function can be selected by pressing the OK key.
If the signal is locked, the present position is automatic stored.
3.1.13 Unicable setting
If in the ‘3.1.2 LNB type’ select you can set SCR.
￭ Unicable type: You can select ‘8*SCR”or”4*SCR”.
￭ Channel No. : You can select SCR channel.
￭ Press ◄► key select frequency of SCR channel or
Input the value by using the numeric keys.
3.1.0.1 Quick Search

Satlink WS6922 Specifications

General

Brand	Satlink
Model	WS6922
Category	Measuring Instruments
Language	English