SATO CG408TT - Appendix

Section 8: Appendix
CG4 Series Service Manual Page 8-1
APPENDIX
The following information is provided:
• 8.1 Optional Accessories - Cutter
• 8.2 Optional Accessories - Dispenser
• 8.3 Optional Accessories - Linerless (Non sepa)
• 8.4 Optional Accessories - Real Time Clock (RTC) Kit
• 8.5 Positions of sensors and options
• 8.6 Operation Mode Selection
• 8.7 Base Reference Point
• 8.8 Paper End
• 8.9 Ribbon End