SATO CL608e - Page 22

16 CL608e/612e
3. Configuration Operation Manual
Hex Dump Selection (DSW2-4)
Enables Hex Dump mode.
Receive Buffer Selection (DSW2-5)
Selects the operating mode of the receive buffer.
Download Mode (DSW2-6)
For Firmware Download.
Protocol Control Code Selection (DSW2-7)
Selects the command codes used for protocol control.
* Factory Default
DSW2-4 SETTING
*
OFF
Disabled
ON Enabled
DSW2
ON
OFF
12 345678
DSW2-5 SETTING
OFF Single Job
*ON Multi Job
1 2 3 4 5 6 7 8
ON
OFF
DSW2
DSW2-6 SETTING
*OFF Disabled
ON Enabled
1 2 3 4 5 6 7 8
ON
OFF
DSW2
DSW2-7 SETTING
*OFF Standard
ON Non-Std.
1 2 3 4 5 6 7 8
ON
OFF
DSW2