SATO CL608e - Label Sensor Adjustments

22 CL608e/612e
3. Configuration Operation Manual
vide a signal level of +5V for a true condition and 0V
when a false condition exists. The maximum voltage
that can be applied to these pins is +50V and the
maximum current they can sink is 500 milliamps.
External Output Signal Types
1 K ohm, ¼W
Pin 13
Vcc = +5V
Signal Out
Pin 1, 3 4 or 6
End Print
(Label Feed
Stop)
Start Print
(Label Feed
Stop)
20 milliseconds
+5V
TYPE 1
0V
+5V
TYPE 2
0V
+5V
TYPE 3
0V
+5V
TYPE 4
0V