Section 3: Basic Specifications
GY412 Quick Guide Page 3-1
BASIC SPECIFICATIONS
Model name GY412
Printing method Direct Thermal
Head density
(resolution)
305 dpi (12 dots/mm)
Printable area 4.09” wide x 11.81” pitch (104 mm wide x 300 mm pitch)
Unprintable area Length direction:
Upper: 0.05” (1.5 mm) Lower: 0.05” (1.5 mm)
Width direction:
Left: 0.05” (1.5 mm) Right 0.05” (1.5 mm)
These measurements do not include backing paper.
Printing speed 3 to 10 inches per second (75 or 120 mm/second) (Setting value: 3, 4, 5, 6, 7, 8,
9, 10)
Some restriction may apply to the print speed, depending on the layout and the
label type.
Label type /label
shape
Fanfold label (Maximum folded height: 5.11”/130 mm). We recommend using
label manufactured or specified by SATO.
Label thickness 100 to 320 μm
0.003 to 0.012”
(0.1 to 0.32 mm)
To Next Page
Loading...
