What to do if my SATO GY412 Printer shows 'Paper end'?
If your SATO Printer displays a 'Paper end' error, it indicates that the printer is out of paper or the paper is not set properly. To resolve this, ensure that you set the paper correctly in the printer.
How to fix 'Cover open' error on SATO GY412 Printer?
If your SATO Printer shows a 'Cover open' error, it could be due to the cover not being properly locked or a failure of the cover open sensor. First, ensure the head portion is locked. If the problem persists, the head open sensor may need adjustment or replacement.
Why does my SATO GY412 say 'Memory full'?
If your SATO Printer displays a 'Memory full' error, it means there is not enough memory available. To fix this, delete unnecessary data from the printer's memory.
How to resolve a 'Cutter error' on my SATO GY412 Printer?
A 'Cutter error' on your SATO Printer can occur if the cutter is jammed or the slit at the cutter portion is not working correctly. Try cleaning up the cutter assembly. If that doesn't work, adjust the belt at the cutter part.
What causes a 'Sensor error' on a SATO Printer?
A 'Sensor error' on your SATO Printer can be caused by several factors: * Improper pitch sensor level: Adjust the pitch sensor level. * Improper setting of sensor type: Set the appropriate paper type. * Label meandering: Clean and adjust the paper route.
What does 'Command error' mean on my SATO GY412 Printer?
A 'Command error' on your SATO Printer indicates that the printer has detected an improper command or parameter in the print data. To resolve this, check the print data.
How do I fix an 'Overrun error' on my SATO GY412 Printer?
An 'Overrun error' on your SATO Printer is often due to improper communication settings or cable connection. Try adjusting the communication settings and ensuring the cable is properly connected.
What to do if SATO GY412 shows 'Buffer over'?
If your SATO Printer displays a 'Buffer over' error, it means the printer is receiving oversized data or there's an inappropriate communication. To solve this, either change the host program to not send data exceeding the buffer capacity or adjust the host program to correct the communication protocol.
Why am I getting a 'Download data error' on my SATO Printer?
A 'Download data error' on your SATO Printer can occur if the printer is receiving unauthorized download data or if there is no download area available. Check the download data to resolve this issue and check download data size.
What does 'BCC check error' mean on SATO GY412 Printer?
A 'BCC check error' on your SATO Printer indicates that the BCC added to the send data differs. To resolve this, check the send data and communication settings.
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Max Print Width | 4.1 inches (104 mm) |
| Resolution | 203 dpi |
| Connectivity | USB, Serial |
| Media Type | Labels, Tags |
| Weight | 4.5 lbs |
| Supported Barcode Types | Code 39, Code 128, GS1-128, MSI |
| Media Thickness | 0.06 mm - 0.18 mm |
| Power Supply | AC 100-240V |
To Next Page
