SATO GY412 - Set Command Error Display

SATO GY412
6
Set Command Error Display
Setting the printer to display errors can help troubleshoot eFORMz projects
that you develop. When an error occurs during printing the printer will pause
and display the error.
This setting should only be enabled in testing environments. Production
printers should not be set to display command errors.
1. Press the LINE button to set the printer to OFFLINE mode.
2. Press ENTER and use the arrow keys to select the wrench and hammer
icon for ADVANCED mode.
3. Press ENTER until you reach the COMMAND ERROR DISPLAY screen.
Change the setting using the arrow keys.
4. Press ENTER once more to save the setting.
5. Press the FUNCTION button to exit out of the menus.
6. Press the LINE button to set the printer back to ONLINE mode.
7. It is recommended that you power the printer OFF and ON again to
ensure the conguration is saved and loaded.