SATO GY412 - Set Printer Type

SATO GY412
5
Set Printer Type
The recommended Printer Type needs is CONTINUOUS.
1. Press the LINE button to set the printer to OFFLINE mode.
2. Press ENTER and use the arrow keys to select the wrench and hammer
icon for ADVANCED mode.
3. Press ENTER until you reach the PRINTER TYPE screen. Change the
setting to CONTINUOUS by using the arrow keys.
4. Press ENTER once more to save the setting.
5. Press the FUNCTION button to exit out of the menus.
6. Press the LINE button to set the printer back to ONLINE mode.
7. It is recommended that you power the printer OFF and ON again to
ensure the conguration is saved and loaded.