What to do if my SATO Printer shows 'Media end or misselected media type'?
If your SATO Printer displays 'Media end or misselected media type', replenish the media. Also, ensure that you have selected the correct media type. Try opening and closing the head lever and the media hold down.
What to do if my SATO M84PRO Printer says 'Ribbon end or ribbon broken'?
If your SATO Printer indicates 'Ribbon end or ribbon broken', replace the ribbon. Also, try opening and closing the head lever and the media hold down.
How to fix a 'Machine Error' on a SATO Printer?
If you encounter a 'Machine Error' on your SATO Printer, try cycling the power off and on.
How to resolve 'EEPROM read/write error' on SATO M84PRO?
If you are getting an 'EEPROM read/write error' on your SATO Printer, cycle the power off and on.
What to do if my SATO M84PRO Printer displays 'Media error'?
If your SATO Printer shows 'Media error', try opening and closing the head lever.
What to do if SATO M84PRO shows 'Head open' error?
If the 'Head open' error appears on your SATO Printer, ensure you latch the print head properly.
How to fix 'Memory card read/write' error on SATO M84PRO?
If your SATO Printer displays 'Memory card read/write' error, format the card and cycle the power.
What to do if my SATO Printer displays 'Memory card battery low'?
If your SATO Printer indicates 'Memory card battery low', replace the battery and cycle the power.
What to do if the print head is damaged on my SATO Printer?
If the print head of your SATO Printer is damaged, replace it and cycle the power.
How to resolve 'RS232 parity error' on SATO M84PRO Printer?
If your SATO Printer displays 'RS232 parity error', match the parity to the system.
General| Print Speed | Up to 10 ips |
|---|---|
| Print Width | 4.1 inches |
| Print Method | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi |
| Max. Print Width | 104 mm |
| Interface | Serial, Parallel, USB, Ethernet (optional) |
| Supported Barcode Types | Code 39, Code 128, Interleaved 2 of 5, Codabar |
| Supported Media Types | Roll-fed, Die-cut, Continuous, Fan-fold |
| Media Thickness | 0.0025 to 0.01 inches |
| Power Supply | AC 100-240V, 50/60 Hz |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Storage Humidity | 10% to 90% non-condensing |
| Media Width | 25.4 mm (1") – 128 mm (5") |
| Ribbon Width | 25.4 mm (1") – 128 mm (5") |
| Operating Humidity | 25% to 85% RH, non-condensing |
To Next Page
