▼
Memory indicator
Logged data : 1 to 1000 lines
: 7001 to 8100 lines
: 8101 to 9000 lines
: 9001 to 10000 lines
From here, the dim bar is shifted to the right in succession.
Ends at… (limited amount)
With this logging option, you can specify the end-point for the Datalogger to
stop logging. This setting is ideal when you want to limit the amount of data
to be collected
Start logging End logging
(ends at the end-point set from 1 to 8100)
Memory indicator (example: end-point is 5500)
Logged data : 1 to 1000 lines
: 3001 to 4000 lines
: 5500 lines
By pages (partitioning)
The storage memory is partitioned into four blocks, each having the
capacity to store 2000 lines of data. This enables the Datalogger to perform
To Next Page
Loading...