SATO SK-L200 II Series - Canceling Preset Start

−63 −
Canceling preset start
Preset start can be canceled using any one of the three ways described
below.
A. Canceling from DATALOGGER for Windows
(1) Start DATALOGGER for Windows.
(2) From the Transfer
(
T
)
menu, click
「
Cancel Preset Start

(
P
)
」
.
(3) The message to conrm the cancel appears. Click OK.
B. Turning off the Datalogger
(1) Press and hold the POWER ON/OFF key for one second or more.
(2) The power to the Datalogger goes out and the preset start is canceled.
C. Canceling from the Datalogger
(1) Press the MODE key until the RES mark is indicated.
(2) After conrming the RES mark of the LCD lights, use the
▲
or
▼
key to
display "OFF."
(3) Press the REC/STOP key to conrm.
The SK-L200T II or SK-L200TH II
α
returns to the measurement state
for temperature or temperature and humidity, respectively.