Need help?Do you have a question about the SATO TG3 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Print Resolution | 305 dpi |
| Print Speed | Up to 6 ips |
| Max. Print Width | 4.09" (104 mm) |
| Media Type | Roll |
| Media Thickness | 0.0024" to 0.008" (0.06 mm to 0.2 mm) |
| Ribbon Length | 984 ft (300 m) |
| Processor | 32-bit RISC CPU |
| Memory | 16 MB Flash, 32 MB SDRAM |
| Interfaces | USB |
| Operating Humidity | 20% to 85% (non-condensing) |
| Barcodes | UPC-A/E, EAN-8/13, Code 39, Code 93, Code 128, GS1-128, GS1 DataBar |
| 2D Symbologies | PDF417, QR Code, Data Matrix, Maxi Code |
| Core Diameter | 1.5 inches |
| Power Supply | AC 100-240 VAC, 50/60 Hz |
| Storage Humidity | 10% to 90% RH, non-condensing |
To Next Page
