24
English
Fonts
installed as
standard
Basic Specifications of TG3 Series
Model TG308/TG312
Head density (resolution)
TG308: 8 dots/mm (203 dpi)
TG312: 12 dots/mm (305 dpi)
Print method Direct thermal and thermal transfer
Printable area 240 (length) × 80 mm (width) (9.4 × 3.1 inches) maximum
Operation modes Continuous, Cutter, Sensor prohibited mode
Print speed
50 to 250 mm/second (2 to 10 inches/second)
* However, restrictions may apply depending on the type of print layout, paper, and carbon ribbon.
Paper Use a roll paper specified by SATO.
Paper thickness
Label paper: 140 to 265 µm (0.14 to 0.265 mm)
Tag stock: 157 to 330 µm (0.157 to 0.33 mm)
* For details on support for RFID tags, please contact your nearest dealer or service center.
Media size
Label paper
Continuous Length : 16 to 237 mm (backing liner: 19 to 240 mm)/
0.6 to 9.3 inches (backing liner: 0.7 to 9.4 inches)
Width : 22 to 80 mm (backing liner: 25 to 83 mm)/
0.9 to 3.1 inches (backing liner: 1.0 to 3.3 inches)
Cutter Length : 22 to 237 mm (backing liner: 25 to 240 mm)/
0.9 to 9.3 inches (backing liner: 1.0 to 9.4 inches)
Width : 22 to 80 mm (backing liner: 25 to 83 mm)/
0.9 to 3.1 inches (backing liner: 1.0 to 3.3 inches)
Tag stock
Continuous Length : 25 to 240 mm (1.0 to 9.4 inches)
Width : 32 to 83 mm (1.3 to 3.3 inches)
Cutter Length : 25 to 240 mm (1.0 to 9.4 inches)
Width : 32 to 83 mm (1.3 to 3.3 inches)
* Size restrictions may apply depending on the conditions of use.
Label paper: Ø250 mm (10 inches) maximum
Core inner diameter: Ø76.4 mm (3 inches), Ø102 mm (4 inches)
Tag stock: Ø250 mm (10 inches) maximum
Core inner diameter: Ø76.4 mm (3 inches), Ø102 mm (4 inches)
Maximum folding height for fan-folded paper: 200 mm
Ribbon size and type
Ribbon length: 450 mm roll maximum
Ribbon width: 84 mm maximum
Winding direction: Both forward and reverse winding
Ta ke-up method: Coreless (standard)
Carbon ribbon Use a carbon ribbon specified by SATO.
(1) X1 text 20×50 dots (TG308), 30×75 dots (TG312) (letters and numbers, symbols)
(2) X2 text 8×20 dots (TG308), 13×30 dots (TG312) (letters and numbers, symbols)
(3) X3 text 13×21 dots (TG308), 20×32 dots (TG312) (letters and numbers, symbols)
(4) WB text 18×30 dots (letters and numbers, symbols)
(5) WL text 28×52 dots (letters and numbers, symbols)
(6) OCR-A 15×22 dots (TG308), 22×33 dots (TG312) (letters and numbers, symbols)
(7) OCR-B 20×24 dots (TG308), 30×36 dots (TG312) (letters and numbers, symbols)
(8) X70 text 32×48 dots (numbers, “$￥−,”) italics
(9) X71 text 40×60 dots (numbers, “$￥−,”) italics
(10) X72 text 48×72 dots (numbers, “$￥−,”) italics
(11) X73 text 64×96 dots (numbers, “$￥−,”) italics
(12) X74 text 32×48 dots (numbers, “$￥−,”)
(13) X75 text 40×60 dots (numbers, “$￥−,”)
(14) X76 text 48×72 dots (numbers, “$￥−,”)
(15) X77 text 64×96 dots (numbers, “$￥−,”)
CG Times (letters and numbers, symbols)
CG Triumvirate (letters and numbers, symbols)
Futura, CG Palacio, CG Century Schoolbook, CG Triumvirate Condensed, CG Univers
Outline fonts Letters and numbers, symbols
Barcodes
UPC-A, UPC-E, EAN-13, EAN-8, CODE39, CODE93, CODE128 (128A, 128B, 128C), GS1-128
(UCC/EAN-128) (Character sets: Set-A, Set-B, Set-C), CODABAR (NW-7), SATOC CODABAR
(NW-7), Reduced CODABAR (NW-7), ITF, Industrial2of5, Matrix2of5, BOOKLAND, MSI,
POSTNET, GS1 DataBar (RSS), GS1 DataBar Omnidirectional, GS1 DataBar Truncated, GS1
DataBar Stacked, GS1 DataBar Stacked Omni-Directional, GS1 DataBar Limited, GS1 DataBar
Expanded, GS1 DataBar Expanded Stacked
* GS1 DataBar was formerly RSS.
2-D codes QR code, Micro QR, PDF417, Micro PDF, Security QR, MAXI code, GS1 DataMatrix (ECC200)
Bitmap
fonts
Paper outer diameter/
core size
Rasterizer
fonts
To Next Page
Loading...
