13
English
C Head lock lever
F Thermal head
Interior
Name and Function of Controls
1 Cover
Open and close this cover to load the paper, ribbon
and other items.
2 Display panel
Displays an error message and instructions.
3 Power ON/OFF switch
Tu r ns power ON or OFF.
4 Roll paper stopper
Set to meet the size of the label used.
5 Boss
Attach the boss to suit the size of the paper core used.
6 Interface slot
Optional interface slot for connection to a PC or other
device.
7 External connector terminal
Interface connector for external signals.
8 AC input power terminal
Used to connect the power cord.
9 Platen roller
This roller feeds the paper. Perform maintenance at
regular intervals.
0 Ribbon take-up spindle
A Ribbon supply spindle
Used to load the ribbon.
B Roll paper supply spindle
Used to load the roll paper.
C Head lock lever
Used to open and close the thermal head.
D Keypad connection terminal
Used to connect the optional keypad (simple input
device).
E Sliding guide
Used to hold down the paper.
F Thermal head
This component is used to print on the paper. Perform
maintenance at regular intervals.
Interior
To Next Page
Loading...
