SATO TH208 - Preparing for First-Time Operation; Charging Battery Pack with External Charger

Section 2: Preparing for First-Time Operation
GY412 Quick Guide Page 2-1
CHARGING THE BATTERY PACK
CHARGING BY INSTALLING THE BATTERY PACK IN THE BATTERY CHARGER (OP-
TIONAL)
Install the battery pack in the battery charger (optional) and charge it.
1. Connect the power cord from the AC adapter to the charger unit. Then, connect the power cord to the AC
adapter and plug it to the outlet.
WARNING
• The optional battery charger set provided for this printer is
specific to this printer. Do not use it for other electrical
equipment.