Section 4: Basic Specifications
TH208 Quick Guide Page 4-1
BASIC SPECIFICATIONS
Model name TH208
Printing method Direct Thermal
Head density
(resolution)
203 dpi (8-dot/mm)
Printable area 6.1" pitch x 2.2" wide (156 mm pitch x 56 mm wide)
Unprintable area Length direction:
Upper: 0.07” (2.0 mm)
Lower: 0.07” (2.0 mm)
Width direction:
Left: 0.05” (1.5 mm)
Right 0.05” (1.5 mm)
These measurements do not include backing paper.
Printing speed 2 to 4 inches per second (50 to 100 mm/sec)
Printing speed differs depending on paper type and usage environment.
Label type /label
shape
Roll paper (Winding face-in/face-out)
We recommend using label manufactured or specified by SATO.
Paper thickness 140 to 190μm
0.005 to 0.007"
(0.14 to 0.19 mm)
To Next Page
Loading...
