Section 4: Basic Specifications
Page 4-2 TH208 Quick Guide
Label size Label size
Continuous type
[Die cut label]
Pitch: 0.6 to 6.1"/16 to 156 mm (Backing paper 0.7 to 6.2"/19 to 159 mm)
Width: 0.9 to 2.3"/25 to 60 mm (Backing paper 1.1 to 2.4"/28 to 63 mm)
[Butt-cut label]
Pitch: 0.6 to 6.1"/16 to 156 mm (Backing paper 0.6 to 6.1"/16 to 156 mm)
Width: 1.1 to 2.3"/28 to 60 mm (Backing paper 1.1 to 2.3"/28 to 60 mm)
Cutter type
[Die cut label]
Pitch: 0.6 to 6.1"/16 to 156 mm (Backing paper 0.7 to 6.2"/19 to 159 mm)
Width: 0.9 to 2.3"/25 to 60 mm (Backing paper 1.1 to 2.4"/28 to 63 mm)
Tear-off type
[Die cut label]
Pitch: 0.6 to 6.1" /16 to 156 mm (Backing paper 0.7 to 6.2"/19 to 159 mm)
Width: 0.9 to 2.3"/25 to 60 mm (Backing paper 1.1 to 2.4"/28 to 63 mm)
[Butt-cut label]
Pitch: 0.6 to 6.1"/16 to 156 mm (Backing paper 0.6 to 6.1"/16 to 156 mm)
Width: 1.1 to 2.3"/28 to 60 mm (Backing paper 1.1 to 2.3"/28 to 60 mm)
Dispenser type
[Die cut label]
Pitch: 0.6 to 4.6"/16 to 117 mm (Backing paper 0.6 to 4.7"/16 to 120 mm)
Width: 0.9 to 2.3"/25 to 60 mm (Backing paper 1.1 to 2.4"/28 to 63 mm)
[Butt-cut label]
Pitch: 0.6 to 4.6"/16 to 117 mm (Backing paper 0.6 to 4.6"/16 to 117 mm)
Width: 1.1 to 2.3"/28 to 60 mm (Backing paper 1.1 to 2.3"/28 to 60 mm)
Linerless type (without cutter)
Pitch: 1 to 3.9"/25.4 to 100 mm
Width: 1.1 to 2.3"/28 to 60 mm
Linerless type (with cutter)
Pitch: 1.7 to 3.9"/45 to 100 mm
Width: 1.1 to 2.3"/28 to 60 mm
Some restrictions may apply to the paper sizes that can be used depending on
the type of paper, usage environment, and application.
Outer diameter of
paper roll /
Internal diameter
of roll core
Outer diameter: Maximum ø2.9"/ø75 mm
Internal diameter: ø1.0"/ø26 mm
Model name TH208
To Next Page
Loading...
