Section 4: Basic Specifications
TH208 Quick Guide Page 4-3
Label issuing
mode
Standard:
Continuous mode, Dispenser mode, Tear-off mode, Sensor off mode
Option:
Cutter mode, Linerless mode (with cutter)
Linerless mode (without cutter)
Dimensions 5.1" (W) x 7.6" (D) x 5.7" (H)
132 mm (W) x 194 mm (D) x 147 mm (H)
Weight Approximately 3.7 pounds/1.7 kg
Power specifica-
tions
AC adapter
Manufacturer: SATO Corporation
Model name: PAH7020
Input power voltage: AC100V to AC240V ±10% (Full range)
Frequency: 50/60 Hz
Power consumption
Input power voltage conditions: AC 100V
At peak: 64.0VA/42.5W (at 30% printing ratio)
During standby: 12.6VA/6.2W
Battery pack Battery type: Lithium ion battery
Manufacturer: SATO Corporation
Model name: PT/MB400-BAT
Rated voltage: 14.8V
Rated capacity: 1700mAh (TYP)
External dimensions: 1.6" W x 0.9" D x 4.2" H (43 mm W x 20.4 mm D x 109 mm
H)
Weight: Approximately 0.3lbs (Approximately 170g)
Charge cycle: Approximately 300 times
Charging time: Approximately 6 hours (Fully charged with the unit)
Approximately 1.5 hours by dedicated charger
Environmental
conditions
(Temperature/
Humidity)
Operating environment: 32 to 104°F, (0 to 40°C) 30 to 80% RH (No condensa-
tion)
Storage environment: 23 to 140°F, (-5 to 60°C) 30 to 90% RH (No condensation)
(These values are not valid for labels and other supplies)
Standard Inter-
face
(1) USB (Full speed, USB version 2.0 compliant)
(2) Scanner connector (Supported PS/2)
(3) SD card slot
(4) FAT file system
Options Cutter unit, Linerless kit (w/cutter), Linerless kit (w/o cutter), External label
unwinder, External label rewinder (RW350), Battery pack, Battery charger, SD
card, Key cover, Wall-mounting kit, 1D barcode scanner, Full keyboard
LED CHARGE (Red)
Model name TH208
To Next Page
Loading...
