SATO WS208 - Wireless LAN Module

1 Accessories Installation Wireless LAN Module
9
1.3 Wireless LAN Module
The Wireless LAN module provides Wireless LAN connectivity for your printer.
To install a Wireless LAN module:
Step 1. Remove the base frame
This part describes how to dismantle your printer.
1. Turn over your printer.
2. Loosen and remove 3 screws from the base.
3. Remove the base frame.
Step 2. Secure the Wireless LAN card and connect it to the main
board
This part describes how to thread the Wireless LAN card cable and connect it to
the main board.
1. Check the cable is connected on wireless module board.
2. Check the antenna is connected to port CN1.