SATO WS412DT - Printer Button and Lights; Feed Button; Status Lights

WS4-DT-r01-30-12-16TM
5
1
Understand
Your
Printer
Printer
Button
and
Lights
1.4
Printer Button and Lights
This section describes the functions of your printer button and lights.
1.4.1 Feed Button
The FEED button is not simply for feeding label. It is able to act as a feed, pause,
resume, restore and run button. The following table shows its functions.
Function Description
Feed Feed a blank label.
Pause Pause printing, if pressed during printing.
Resume Resume printing, if pressed in pause mode.
Restore Restore your printer to the online mode, if pressed after
fixing the error.
Run Run the command of the system mode after selecting the
command.
1.4.2 Status Lights
Your printer has two status lights: LED 1 and LED 2. They are helpful for checking
printer’s condition. Both lights have three colors: green, orange and red; they also
have three blinking speed: fast, medium and slow. LED 1 glows green when your
printer is working properly; it glows orange or red when your printer encounters
issues. LED 2 indicates the issue your printer runs into. The following tables show
the LEDs behavior and the condition they indicate.
Symbol Blinking Speed Blinking Interval
**
Fast 0.5 Second
*
Slow 2 Seconds
* LED2 + *LED1 Slow LED2 & LED1 Blinking Interval at same time
* LED2 + LED1 * Slow LED2 & LED1 Blinking Interval at different timing